JayCee. Distinguished Member. Jan 25, 2016. #4. Use a 3 phono to 3 phono composite video/audio lead from the yellow, red/white output (on RHS of your pic of the NAD) to the corresponding yellow, red & white phono sockets on the Tvthe yellow phono goes into the top connector and red/white to the bottom of the group of 5 phono inputs. JayCee. A scart to HDMI adaptor is a device that allows you to connect your old-school video game consoles, DVD players, and other devices with the standard SCART connector (also known as Euroconnector) into an HDMI port on your TV. Basically the answer is no, TV's don't normally output digital input video from the analogue outputs. However the source of the video normally does. In your case the source of the video/audio (your laptop), needs a composite video output plus analogue audio to record it. Much depends on the outputs of your lsptop. HDMI: Connect one end of the HDMI cable to the HDMI output on your DVD player and the other end to an available HDMI input on your television. Component: Connect the red, blue, and green component cables to the corresponding colored outputs on your DVD player. Then, connect the other ends to the corresponding inputs on your television. While your existing cable is still connected, press the Setup button on your Foxtel remote. Step 2: Scroll down to the System Setup option and select. Step 3: Scroll down to System Settings and select. Select Picture Settings. Step 4: Scroll down to Video Output option and change setting to YUV. Scroll down to Save New Settings and press OK. Name: Scart to HDMI Converter with HDMI Cable, Full HD 720P/1080P Switch Video Audio Converter for HDTV Monitor Projector STB VHS Xbox PS3 Sky Blu-ray DVD Player Company: Uhddadi Amazon Product Rating: 3.8 Fakespot Reviews Grade: A Adjusted Fakespot Rating: 3.8 Analysis Performed at: 10-22-2021 Advanced Video Settings on Xbox: If you would like to adjust advanced video settings on Xbox, then check the following guide: Go to Xbox > Profile & system > Settings > General > TV & display options > Advanced > Video modes or Video fidelity & overscan. Here you can adjust settings like: The source I am trying to capture from has an HDMI output and a SCART output. I can't use the HDMI output so I am having to resort to using the SCART (image quality isn't really a big issue for me). How can I connect from the SCART to the H264 Pro Recorder? Go with scart to HDMI. The picture is significantly better than composite to hdmi. If you have some spare change, go with a Framemeister. It's probably the best available today. There's also one called the OSSC. It's good, but still improving. Genesis has some of the best RGB video of any console. Definitely worth it. I tried to plug the scart converter to an hdmi screen directly, same message. However, I tried to replace the SCART converter with another SCART to HDMI device (actually it's a device used to record scart or hdmi inputs to a hard drive to save them for later use… but for some reasons I don't have access to this device anymore) and it's working… Lu5SRf.